IS/IEC 62305 & IS 3043 Compliant Systems · ARK Make
Lightning Protection System in Hyderabad
LIGHTNING PROTECTION SYSTEM · HYDERABAD

Lightning Protection System in Hyderabad

DFMHUB manufactures ARK Make lightning protection systems and delivers full design, installation and testing across Hyderabad and greater Telangana — from HITEC City to Shamshabad.

HYDERABAD, TELANGANA

Why Hyderabad projects need a city-specific design

Hyderabad sees 40-55 thunderstorm days annually with severe lightning activity during monsoon onset. That strike density drives the IS/IEC 62305-2 risk calculation upward, and for Pharma & life sciences plants, data centres, IT campuses, defence research facilities the result is usually Lightning Protection Level I or II — a tighter mesh, more down conductors and fully coordinated surge protection.

Earthing is the other half of the problem. Ground around Hyderabad is characterised by hard granitic rock and rocky terrain with high dry-season resistivity (150-500 Ω·m), so we run a Wenner four-pin soil resistivity survey before design and select copper bonded, deep-bore or chemical electrodes accordingly, rather than defaulting to standard three-metre pits that dry out.

Our Hyderabad team handles roof and facade installation on occupied buildings with permit-to-work and height-safety controls, then hands over fall-of-potential earth resistance readings for every electrode, continuity across every test link, as-built drawings and IEC 62561 material certificates for fire NOC, insurance and audit use.

Regular project work in the region covers Pharma & life sciences plants, data centres, IT campuses, defence research facilities, with material supply to EPC and electrical contractors across HITEC City, Gachibowli, Genome Valley, Pashamylaram, Patancheru, Jeedimetla, Shamshabad and emergency post-strike inspection typically attended within 24 to 48 hours.

Hyderabad coverage

AREAS SERVED

HITEC City, Gachibowli, Genome Valley, Pashamylaram, Patancheru, Jeedimetla, Shamshabad

SECTORS

Pharma & life sciences plants, data centres, IT campuses, defence research facilities

SOIL PROFILE

hard granitic rock and rocky terrain with high dry-season resistivity (150-500 Ω·m)

STORM EXPOSURE

40-55 thunderstorm days annually with severe lightning activity during monsoon onset

SUPPLIED IN HYDERABAD

ARK Make components delivered across Hyderabad

Project quantities with test certificates, batch traceability and scheduled site delivery.

ARK Air Terminals (Franklin Rods)

CU / AL / SS 18-25 MM DIA
Solid copper, aluminium and stainless steel finials with machined multi-point tips, supplied in 0.5 m to 3 m lengths to IS/IEC 62305-3 rolling sphere design.

ARK Mesh Conductors & Tapes

25X3, 25X6, 32X6 MM
Annealed copper, tinned copper and aluminium tapes for mesh-method air termination and roof-level ring conductors, tested for 100% cross-section continuity.

ARK Down Conductors

CU TAPE / BARE CU / AL
Down conductors routed on shortest, straightest paths with defined bend radii, supplied with matched fixings for RCC, ACP, glass and metal facades.

ARK DC Tape Clips & Saddles

SS / CU / PVC-LINED
Facade and roof fixing clips at 1 m horizontal / 1.5 m vertical spacing, with non-staining stand-off options for architectural surfaces.

ARK Test Link / Inspection Joints

CU BIMETAL, IP65 ENCLOSURE
Disconnecting joints at 1.5-1.8 m above finished ground level for annual continuity and earth resistance testing without dismantling.

ARK Exothermic Weld Kits & Moulds

GRAPHITE MOULDS, 25-250 G
Molecular copper-to-copper and copper-to-rebar welds that carry full lightning current and never loosen or corrode at the joint.

Lightning Protection System in Hyderabad — questions people ask

Who is the best lightning protection system manufacturer in Hyderabad?

DFMHUB manufactures ARK Make systems and supplies pharma units, data centres, and IT campuses across HITEC City, Gachibowli, Genome Valley, and Patancheru with turnkey engineering.

What is the cost of lightning protection in Hyderabad?

Cost depends on protection level (LPL I for pharma & data centres). DFMHUB provides free site surveys and itemized BOM quotes across Hyderabad.

Is LPS compliance required for pharma plants and data centres in Hyderabad?

Yes, Telangana Fire & Electrical Inspectorate NOCs and USFDA/GMP audits for pharma plants require certified IS/IEC 62305 lightning protection.

How does Hyderabad's rocky ground impact earthing design?

Hard granitic rock requires deep-bore chemical earth electrodes and bentonite enhancement compounds to reach low target resistance.

What is the storm risk profile in Hyderabad?

40-55 thunderstorm days per year with intense ground flash density, pushing high-value facilities to LPL I or II rolling sphere mesh protection.

How long does LPS installation take in Hyderabad?

5 to 12 days for commercial towers in HITEC City; 2 to 4 weeks for pharma complexes in Genome Valley or Patancheru.

Do you issue test certificates for Hyderabad installations?

Yes, fall-of-potential earth resistance test readings, continuity logs, as-builts, and IEC 62561 certificates are included in the handover pack.

Which areas in Hyderabad do you serve?

Entire Hyderabad metropolitan area including HITEC City, Gachibowli, Genome Valley, Patancheru, Shamshabad, and Jeedimetla.

OTHER LOCATIONS

Lightning Protection System in other cities

TALK TO AN ENGINEER

Send your drawings. Get a compliant system design back.

Share roof plans, structure height and soil data — our team returns a risk assessment summary, air termination or earthing layout, bill of materials and a fixed-price proposal.

  • Risk assessment to IS/IEC 62305-2
  • IEC 62561 type-tested ARK Make components
  • Installation, testing and documented handover

Typical response within one working day. Your details are used only to respond to this enquiry.